0086-4001-189-180
中文
English
Design documents and resources
Typical application plan
Associated products
CMT4522W

Bluetooth 5.2 / IEEE 802.15.4 System on Chip

CMT4522-.png

Introduction:


CMT4522 is a System on Chip (SoC) for Bluetooth 5.2 / IEEE 802.15.4 applications. It has ARM® Cortex™-M0 32-bit processer with 64K retention SRAM, 128KB-8MB flash, 96KB ROM, 256bit efuse, and an ultra-low power, high performance, multi-mode radio. Also, CMT4522 can support BLE / IEEE 802.15.4 with security, application and over-the-air download update. Serial peripheral IO and integrated application IP enables customer product to be built with minimum bill-of-material (BOM) cost.


Key Features:


  • ARM® Cortex™-M0 32-bit processor with SWD

  • Memory:

  • 128KB-8MB in-system flash memory

  • 64KB SRAM, all programmable retention insleep mode

  • 4-way instruction cache with 8KB CacheRAM

  • 96KB ROM

  • 256bit efuse

  • 22 general purpose I/O pins:

  • GPIO status retention in off/sleep mode

  • configurable as serial interface andprogrammable IO MUX function mapping

  • All pins can be configured for wake-up

  • All pins for triggering interrupt

  • 3 quadrature decoder(QDEC)

  • 6-channel PWM

  • 2-channel PDM/I2C/SPI/UART

  • 4-channel DMA

  • DMIC/AMIC with microphone bias

  • 8-channel 12bit ADC with low noise voice PGA

  • 6-channel 32bit timer, one watchdog timer

  • Real timer counter (RTC)

  • Power, clock, reset controller

  • Flexible power management:

  • Operating Voltage range 1.8V to 3.6V

  • Embedded buck DC-DC and LDOs

  • Battery monitor

  • Power consumption:

  • 0.3μA @ OFF Mode(IO wake up only)

  • 1μA @ Sleep Mode with 32KHz RTC

  • 13uA @ Sleep Mode with 32KHz RTC andall SRAM retention

  • Receive mode: 4mA @3.3V power supply

  • Transmit mode: 4.6mA(0dBm outputpower) @3.3V power supply

  • MCU: <60uA/MHz

  • RC oscillator hardware calibrations:

  • Internal High/Low frequency RC osc

  • 32KHz RC osc for RTC with +/-500ppm accuracy

  • 32MHz RC osc for HCLK with 3% accuracy

  • High Speed Throughput:

  • Support BLE 2Mbps Protocol

  • Support Data Length Extension

  • Throughput up to 1.6Mbps(DLE+2Mbps)

  • AoA/AoD Direction Finding

  • Support SIG-Mesh Multi-Feature:

  • Friend Node

  • Low Power Node

  • Proxy Node

  • Relay Node

  • 2.4 GHz transceiver:

  • Compliant to Bluetooth 5.2

  • Sensitivity:

-99dBm@BLE 1Mbps data rate

-105dBm@BLE 125Kbps data rate

-103dBm@IEEE 802.15.4 250Kbps data rate

  • TX Power -20 to +10dBm in 3dB steps

  • Single-pin antenna: no RF matching or RX/TXswitching required

  • RSSI (1dB resolution)

  • Antenna array and optional off-chip RF PA/LNAcontrol interface

  • AES-128 encryption hardware

  • Link layer hardware:

  • Automatic packet assembly

  • Automatic packet detection and validation

  • Auto Re-transmit

  • Auto ACK

  • Hardware Address Matching

  • Random number generator

  • Operating temperature:

  • -40˚C ~+85 ˚C (Consumer)

  • -40 ˚C ~+105 ˚C (Industrial)

  • RoHS Package: QFN32(4mm x 4mm)


Applications:


wearables, beacons, home and building,health and medical, industrial and manufacturing,retail and payment, data transmission, PC/mobile/TVperipherals, internet of things (IoT)


Design documents and resources
Certification & Test Reports:
Wireless RF IC RoHS
2022-05-05
Wireless RF IC REACH
2022-05-05
Typical application plan
Smart Wear

More
Smart Phone

More
Outdoor Sports Product

Outdoor Sports Product

More
Smart Wear

More
Smart Phone

More
Outdoor Sports Product

Outdoor Sports Product

More
Associated products
Professional RF&SENSOR Designer and Manufacturer
Copyright ©2018 HOPE Microelectronics CO., Ltd. All rights reserved.