Receiver Module
1. Descriptions of RF Receiver Module RFM219SW:
The RFM219SW devices are ultra low power, high performance, low-cost OOK stand-alone RF receiver module for various 300 to 960 MHz wireless applications. The RFM219SW covers the frequency range from 300 to 480MHz while the RFM219SW covers the 300 to 960 MHz frequency range. They are part of the CMOSTEK NextGenRFTM family, which includes a complete line of transmitters, receivers and transceivers.
An embedded EEPROM allows the frequency, symbol rate and other features to be programmed into the device using the CMOSTEK USB Programmer and RFPDK. Alternatively, in stock products of 433.92/868.35 MHz are available for immediate demands without the need of EEPROM programming. When the RFM219SW is always on, it consumes only 3.8 mA current while achieving -108 dBm receiving sensitivity. It consumes even less power when working in duty-cycle operation mode via the built-in sleep timer. The RFM219SW receiver together with the RFM11x transmitter enables an ultra low cost RF link.
2. Features of RF Receiver Module RFM219SW:
● Embedded EEPROM
● Very Easy Development with RFPDK
● All Features Programmable
● Frequency Range:
300 to 480 MHz (RFM210W)
300 to 960 MHz (RFM217W)
● Symbol Rate: 0.1 to 40 kbps
● Sensitivity: -108 dBm at 1 kbps, 0.1% BER
● Configurable Receiver Bandwidth: 50 to 500 kHz
● 3-wire SPI Interface for EEPROM Programming
● Stand-Alone, No External MCU Control Required
● Configurable Duty-Cycle Operation Mode
● Supply Voltage: 1.8 to 3.6 V
● Low Power Consumption: 3.8 mA
● Low Sleep Current
60 nA when Sleep Timer Off
40 nA when Sleep Timer On
● RoHS Compliant
● Module Size:32x11x5.0mm
3. Applications of RF Receiver Module RFM219SW:
● Low-Cost Consumer Electronics Applications
● Home and Building Automation
● Infrared Receiver Replacements
● Industrial Monitoring and Controls
● Remote Automated Meter Reading
● Remote Lighting Control
● Wireless Alarm and Security Systems
● Remote Keyless Entry (RKE)
