last 2026-11-19

HOPERF' Sub-1GHz RF chip unlocks multiple wireless meter reading communication solutions 

Share to:

In the era of the Internet of Everything, metering terminals such as water meters, electricity meters, gas meters, and heat meters not only need to accurately collect and record user usage data, but also need to upload the data to the concentrator/gateway on demand (real-time/high-frequency/periodic) through a reliable communication link, and then aggregate it to the management platform through the backhaul network, thereby realizing a closed loop of business such as remote meter reading, usage analysis, tiered billing, anomaly diagnosis, overdue payment reminders, and energy optimization.

 

 

 

However, the deployment scenarios of various metering terminals are very diverse, covering urban, rural and industrial sites, and generally have characteristics such as scattered locations, complex installation environments, long-term battery power supply and long operation and maintenance cycles.

 

To efficiently complete the aggregation and uploading of massive amounts of metering data, it is necessary to build an intelligent metering network that matches the characteristics of terminal deployment.

 

This network must not only have good communication coverage, but also take into account multiple dimensions such as terminal power consumption, network deployment cost and system scalability.

 

Among them, the Sub-1GHz wireless communication scheme has become one of the important technical routes for realizing the centralized uploading of metering data due to its advantages such as strong diffraction ability, low penetration loss, long transmission distance and low communication power consumption.

 

Sub-1GHz RF chips: the underlying communication foundation of smart metering networks

 

Sub-1GHz RF chips are the underlying communication foundation for building Sub-1GHz wireless communication solutions, operating in the global unlicensed ISM (Industrial, Scientific and Medical) band. Compared to 2.4GHz RF chips such as BLE and Wi-Fi, Sub-1GHz RF chips are more suitable for smart metering, environmental sensing and industrial monitoring applications with low data rate and small data volume transmission requirements.

 

 

Schematic diagram of Sub-1GHz wireless communication performance

 

For smart metering terminals with dispersed installation locations and complex coverage environments, Sub-1GHz RF chips operate at lower frequencies, resulting in lower free-space path loss. Furthermore, by properly configuring transmit power, receive sensitivity, antenna, and channel parameters, the communication link budget can be further optimized, providing a solid wireless communication foundation for remote data acquisition.

 

Furthermore, different countries and regions often have different requirements for the communication frequency band, channel bandwidth, modulation method, and transmission power of wireless metering systems. Sub-1GHz RF chips have a wide frequency configuration range and multiple modulation methods, which can provide more flexible hardware selection space for different regions and projects.

 

From the perspective of protocol stack hierarchy, the Sub-1GHz RF chip is only responsible for physical layer (PHY) functions such as wireless signal transmission, reception, modulation, and demodulation, while the data link layer, network layer, and application layer related protocol logic are implemented by the main control MCU in conjunction with the corresponding software stack.

 

 

Based on a Sub-1GHz RF hardware platform, it supports development paths for different communication protocols.

 

As shown in the figure above, as long as the PHY parameters such as the operating frequency band, modulation method, and data rate of the Sub-1GHz RF chip meet the requirements, developers can independently design private communication protocols based on the chip's physical layer communication capabilities. Alternatively, they can develop wireless communication solutions that adapt to standardized protocol systems such as W-Mbus and Wi-SUN, based on target standards and application requirements and industry specifications.

 

CMT2310A, high-performance Sub-1GHz RF transceiver chip

 

For example, the CMT2310A is a high-performance Sub-1GHz wireless transceiver chip that adopts a highly integrated RF transceiver architecture, supports multiple modulation methods and data packet processing functions, and operates in frequencies ranging from 113 to 960MHz.

 

It can provide a flexible RF hardware foundation for smart metering devices such as smart meters, water meters, and gas meters in different countries and regions, adapting to the frequency band planning and wireless communication needs of different regions.

 

 

 

In terms of communication performance, the CMT2310A has a configurable transmit power of up to +20dBm and a receive sensitivity of up to -122dBm (433.92MHz, 2.4kbps, 2FSK). In smart metering scenarios, the higher transmit power and receive sensitivity can provide greater design space for the wireless link budget, which helps to improve communication reliability and coverage in complex installation environments and meet the wireless data transmission needs between long-distance meter reading and metering terminals and concentrators.

 

In terms of power consumption, the CMT2310A supports multiple low-power operating modes, and the transmit and receive states can be flexibly configured according to the system's communication requirements. Among them, the Duty-Cycle operating mode and the Ultra-Low Power Receive mode (SLP) can help the system reduce the average power consumption during wireless reception.

 

In addition, developers can design reasonable wireless working strategies by combining the data acquisition cycle, receiving window and communication timing of the metering equipment. This will reduce terminal power consumption and extend the service life of battery-powered metering equipment while meeting the communication requirements of timed meter reading, data reporting and downlink command reception.

 

In terms of modulation, the CMT2310A supports OOK, 2(G)FSK, 4(G)FSK and G(MSK) modulation. The maximum FSK data rate is 500kbps, and the maximum OOK data rate is 300kbps. Developers can also configure the RF parameters according to the communication distance, data transmission rate, channel bandwidth and power consumption budget of the target application to adapt to the frequency band specifications, communication protocols and smart metering application requirements of different countries and regions.

 

In addition, the CMT2310A integrates a variety of features, including Automatic Frequency Correction (AFC), three different Clock Recovery Systems (CDR), Effective Signal Monitoring (PJD, RSSI), Ultra-Low Power Receive (SLP) and Duty-Cycle Receive, Fast Transmit or Receive Frequency Hopping, Carrier Sense Multiple Access (CSMA), Automatic Acknowledgment and Data Retransmission, and Antenna Diversity.

 

These functions help smart metering devices improve their signal detection and reception decision-making capabilities, enhance the adaptability of wireless communication to frequency deviations and complex wireless environments, and improve the reliability and efficiency of data transmission through mechanisms such as channel eavesdropping, automatic response, data retransmission, and antenna diversity, so as to meet the application requirements of long-term operation, remote reading, and stable networking of smart metering systems.

 

 

https://www.hoperf.com/service/apply/

 

If you are interested in HOPERF's independently developed Sub-1GHz RF transceiver chip CMT2310A or other Sub-1GHz RF chips/modules , please scan the QR code above or copy and open the link at the end of the article to apply for samples. We will be happy to serve you!